Classification Of Hair Straighteners

1. Hair straighteners can be divided into ceramic heating elements, PTC heating elements and MCH heating elements according to different heating elements. The advantages of ceramic heating elements are environmental protection and fast heating speed. Generally, the surface temperature of the plywood can reach 200 degrees in 30 to 45 seconds. However, since the ceramic heating element is sintered at a high temperature above 1000 degrees, its temperature will quickly exceed 300 degrees after the circuit loses control, which will burn out the plastic material fixing the heating plate, causing the heating plate to fall off, and may come into contact with user, and burn the skin.
PTC is the abbreviation of Positive Temperature Coefficient, which translates as positive temperature coefficient, or PTC thermistor for short. PTC is also sintered at high temperature, but the maximum temperature of its surface can be controlled during sintering. According to the manufacturer's requirements, the surface can be sintered to below 280 degrees, or any temperature the manufacturer wants. Generally, it is sintered to 230 degrees to 280 degrees. But its disadvantage is that it heats up to 200 degrees slowly, usually in about one and a half or 2 minutes. In addition, during use, it cannot continue to maintain a higher temperature like ceramic heating elements. Straightening hair is slightly less effective.
2. According to the different materials of the heating plate, hair straighteners can be divided into: pure ceramic heating plate, aluminum plate with ceramic glaze on the surface, and microcrystalline glass plate. The advantages of ceramic heating plates are environmental protection, good insulation performance, and good safety. The disadvantages are that the processing cycle is long and there are many processing steps. Since the edges are difficult to handle and are very smooth, the hair will be pulled slightly during the hair straightening process.
The advantage of spraying aluminum plates with ceramic glaze is that it is easy to produce. In addition, due to mechanical forming, the edges are very smooth and will not pull hair. Since the surface is sprayed with ceramic glaze, the hair pulling effect is also very good. The disadvantage is that because it is metal, it is not insulated. The internal heating element must be insulated to avoid safety hazards caused by leakage.
Ceramic glass plates are rarely used, mainly because their surface is not as smooth as ceramic glaze. In addition, it is not easy to form and fix, so the product structure needs to be redesigned.
3. Hair straighteners are structurally divided into two types: V-type and X-type. X-type was more popular in the early days, but V-type is more popular recently. Because the V-shaped hair straightener can not only straighten hair, the streamlined-looking hair straightener can also be used to curl hair. More and more hairdressers are using hair straighteners to curl hair.
4. Hair straighteners are divided into wired hair straighteners and wireless rechargeable hair straighteners according to different power sources. Wired hair straighteners are powered by connecting to the mains, while wireless rechargeable hair straighteners are powered by a charger. Charge the rechargeable battery and use the battery as the power source. The advantage of a wired hair straightener is that it can work continuously. The disadvantage is that if the design and production of the hair straightener are not properly controlled, there will be safety hazards. In addition, it will be inconvenient to have a power cord during use, and it will be inconvenient to carry it out. The advantage of the wireless hair straightener is that it is safe because it is powered by a tributary stream, and it is easy to carry when traveling. But the disadvantage of wireless hair straighteners is that they can only work for 30 minutes to 1 hour after each charge.
5. Hair straighteners can be divided into wide plate, medium plate, narrow version and mini type according to size.
The length of the hair straightening plates of a wide-plate hair straightener is generally 90MM and the width is 42MM. The length of the medium-plate hair straightening plates is generally 90MM and the width is 24MM. The length of the narrow-plate hair straightening plates is generally 80-90MM and the width is 24MM. 13-14MM. The length of mini hair straightening boards is generally 60MM and the width is 13-14MM.
6. Hair straighteners are divided into ordinary types and wet and dry types according to the type of hair straightening. Ordinary hair straighteners must blow-dry your hair before starting to straighten hair, while wet and dry hair straighteners can straighten wet hair. The straightening plate of a wet and dry hair straightener should have 8-10 pores so that water can turn into steam and emerge from the pores.
7. Voltage and export country classification, plugs include Chinese plug, European plug, American plug (American leakage protection plug), Australian plug, Japanese plug, German electric plug, South African plug, British plug and other plugs. Voltage: There are also global universal voltages of 110V-240V, and specific voltage or current for a certain country.